Leather motorcycle jackets have always been the best choice for bikers all over the world. Most bikers use them as an essential part of their daily clothing. This excessive use results in the color fading of the jackets. This makes the coolest thing you ever bought look old and weathered. They lose their shine and the essence that makes them look new. Although many riders prefer this look, many don’t like it this way. Most think it’s time they need to buy new ones if they don’t know they can restore leather biker jackets to the way they were when they were recently purchased. Yes, it is very convenient and does not take much time. It just takes a bit of effort, which is nothing like lifting tons of loads on your shoulders; the effort required is simply putting some of your muscles to work to restore your leather biker jackets to their original shape.
Is that how it works. The required material is readily available at various leather shops and many shoe care providers or even cobblers. When you have the necessary materials clean the dirt off your leather biker jackets with just a damp cloth, make sure the cloth is clean and you don’t need any type of detergent application here. You should also deglaze your coolest accessory to remove various finishes, oils, etc. which are applied to the surface of leather jackets. It is a prerequisite for applying color to motorcycle jackets, as if there are still oils, finishes or waxes left on the surface, the surface will not pick up the color properly. You just need to select a place where there is no chance of debris falling on your leather biker jackets when you color it.
You also need to ensure maximum exposure of each and every part of your leather biker jackets while painting them. This can be achieved by hanging the jacket over an already full hangar where heavy clothing is already hanging. This will help plump up your leather biker jackets and ensure maximum exposure of even the places that were hidden under the wrinkles. You must cover the clothes hanging on the hanger under the jacket with a garbage bag or other plastic bag that is enough to cover the clothes well so that they do not take on the color that is being sprayed. Now everything is ready to apply the paint.
The color selection should also be done carefully and the color you have selected should also match the color of the jacket. Apply the first coat of paint by spraying lightly, going from the top to the bottom of the leather biker jackets. Repeat the procedure one more time, but allow at least 15 minutes after applying the first coat for it to dry, and then continue spraying the second coat.
This is how we will restore your leather biker jackets like they have never been worn before. You can also use other finishes to get the desired effects.