ATVs are designed for vigorous long-term use. It is not uncommon for them to get muddy and dirty as they are also used to rough terrain and even tougher drivers. However, this makes them vulnerable to some damage and therefore it is not uncommon for the shaft to give way over time.

A thing or two about quad axle replacement

Replacing a Suzuki King Quad Axle can be an expensive undertaking. Therefore, it is important to keep your ATV in good operating condition. Always inspect ATV parts at least once a month and clean them thoroughly. Also, depending on the make and model of your ATV, some axles may be a bit difficult to find or may require a special order from a different condition. Therefore, it is always best to have a replacement Suzuki king quad axle on hand. If the current axle is damaged, the replacement will come in handy and the ATV will be up and running with little downtime.

Suzuki ATV and quad axles

Suzuki ATVs are known for their popularity and, just like any other ATV, you can find broken axles too. This article will focus on replacing Suzuki King Quad axles in order to better equip readers with the knowledge and procedures necessary for successful removal and replacement.

Suzuki King Quad Axle Removal Procedure:

The whole process consists of two parts. The first part is to remove the faulty Suzuki axle. The second part deals with the installation of the new one.

Tire removal – The first step is to remove the tires to get to the quad axle. To do that, the ATV must be placed on a stand or jack.

Caliper removal – Removing the tires will expose the brake caliper. It must be removed to get to the shaft. Remove it with the proper tools.

Removing the hub nut – Getting to the Suzuki quad axle requires the removal of many parts. Next in line for removal is the hub nut. This is the hardest part of the entire procedure, as it requires a lot of force to loosen the large hub nut. Once removed, the broken shaft can be easily retrieved.

Suzuki King Quad Axel Installation:

Installation follows exactly the same procedure mentioned above in reverse.

• Once the faulty Suzuki Quad King Axle is removed, simply slide the new axle in.

• Install the hub nut in place and tighten it as tightly as possible.

• Install the brake calipers.

• Put the tires back on the ATV

• Drop the ATV off the stand or jack.

The process itself doesn’t seem very difficult on paper, however it actually requires a certain degree of patience and skill. However, it is not something that you should go to an ATV mechanic to get fixed. ATVs are similar to automobiles in many respects because the underlying mechanics of both types of machinery are the same. Suzuki King quad axles are robust equipment, but even they can be damaged over time. So push your ATV to the limit if you have to, but don’t overdo it.

Leave a comment

Your email address will not be published. Required fields are marked *